The phenomenon that computer whipstitch machine appears not to cut a line is each machine trims a master worker, the phenomenon that jockey can encounter, dress is small today machine (Http://www.fzwjg.com) what should share with everybody is the account that teachs everybody how to judge breakdown quickly, and the method that how eliminates quickly. Welcome everybody actively is in most lower part leaves a message to discuss together, learn together!
Phenomenon of trouble of computer whipstitch engine:
(one) the machine does not have movement shears a line;
(2) have action shears a line, but cut ceaseless line
(3) in front it is normal to cut a line, the line is cut not to have a movement from the back
(4) in front cut a line not to have a movement, it is normal that the line is cut from the back
(5) have action shears a line, but now and then cut ceaseless line
1
Without processing technique of movement shears a line
One, the examination is electronic-controlled whether had inserted with the jumper of nose;
2, pattern shears a line is right;
Check a method: The F on examination indication screen is cut and B cuts the light whether open, open method presses key of mode shears a line, adjust " 3 " , press again " OK " key is saved can.
3, get on next pulling to move electro-magnet shears a line the examination is agile
(whether does group of sword of examination of not agile proposal have a foreign body, or change electro-magnet shears a line)
4, check 3 inductor indicator light to whether often shine; The machine is normal circumstance inductor the light is not bright. (note: Be in not below circumstance of keep out inductor)
After when having fabrics keep out, be like inductor is mixed prevent the inductor that cut cloth the lamp often shines
Examination (next graphs) the induction inside red circle bead whether rubbish, dust is held off; If have,clear instantly, the inductor after after clearing, be being checked again and prevent the inductor that cut cloth whether does the lamp often shine
Debug operation measure:
1, bolt by P at the same time + OK key makes an appointment with 1.5 seconds, screen shows P-26;
2, hind inductor lamp is long bright: Move to P-38 parameter by right key; By on key shows 100; Press again on key increases 100 costs (100-255) , press next " OK " key is saved, the inductor after tone comes the light is not bright (not keep out induction bead below the circumstance) can cut a line normally. (1.9 version are only adjustable P-38 parameter; 2 version above can adjust P-67 parameter, 1 instead 0 can) .
3, prevent the inductor that cut cloth the lamp often shines: Move to P-33 parameter by right key; By on key shows 100; Press again on key increases 100 costs (100-255) , press next " OK " key is saved, tone comes prevent the inductor that cut cloth the light is not bright (not keep out induction bead below the circumstance) can cut a line normally. (1.9 version are only adjustable P-33 parameter; 2 version above can adjust P-68 parameter, 1 instead 0 can) .
Hind inductor or prevent the inductor that cut cloth to often still shine, the proposal changes inductor or emitter;
(hind inductor line mark is D line; Emitter mark is K line after. Prevent the inductor that cut cloth line mark is H line; Prevent mark of the emitter that cut cloth to be G line. )
Version date discerns when the method switchs on the mobile phone electronic-controlled box shows screen shows 1.9, it is 1.9 version, show 2 are 2 version
2
Have action shears a line, cut the processing technique of ceaseless line
One, check mechanical razor blade occlusive volume is normal.
Check a method: (next graphs)
Adjust a method: (if pursue 9, graph 10, graph 11)
3
It is normal that the line is cut before, the line is cut not to have behavioral processing technique after
1, the examination cuts line pattern correct.
Check a method: The F on examination indication screen is cut and B cuts the light whether open, open method presses key of mode shears a line, adjust " 3 " , press again " OK " key is saved can.
2, gesticulation is correct, correct gesticulation is pushed to after tailor is finished, be made the same score seam makings course to prevent the inductor that cut cloth.
3, prevent the inductor that cut cloth the lamp often shines: Move to P-33 parameter by right key; By on key shows 100; Press again on key increases 100 costs (100-255) , press next " OK " key is saved, tone comes prevent the inductor that cut cloth the light is not bright (not keep out induction bead below the circumstance) can cut a line normally. (1.9 version are only adjustable P-33 parameter; 2 version above can adjust P-68 parameter, 1 instead 0 can) .
4
The line is cut not to have a movement before, the processing technique with normal line is cut after
The F on examination indication screen is cut and B cuts the light whether open, open method is adjusted by key of mode shears a line " 3 " , press again " OK " key is saved can.
5
Have action shears a line, now and then the processing technique that cuts ceaseless line
1, the examination cuts linear velocity to whether pass fast or too slow;
Adjust a method:
Bolt by P at the same time + OK key makes an appointment with 1.5 seconds, screen shows P-26;
Move to P-45 parameter by right key, by fluctuation key is adjusted, press again " OK " key is saved can.
(the value is less cut linear velocity faster; The value cuts linear velocity greatly more slower. )
2, attaint of electro-magnet shears a line. (change electro-magnet shears a line)
