Have the vitreous glue that does not become moldy forever?

Do not think vitreous glue uses those who stick glass namely.

Be stuck as what a kind of major accepts a margin and agent, vitreous glue can appear in all sorts of places that decorate:

Wash his hands for instance the aperture between pool mesa and metope;

Have the vitreous glue that does not become moldy forever?

The aperture between ambry mesa and cistern;

Have the vitreous glue that does not become moldy forever?

The door is covered with the aperture between metope;

Have the vitreous glue that does not become moldy forever?

The aperture of closestool bottom and ground;

Have the vitreous glue that does not become moldy forever?

The aperture of shower room bottom and ground;

Have the vitreous glue that does not become moldy forever?

In addition, still toilet makes up the next pool of crock of lens, bath, mop, window, water nozzle, line that play a base place that has crack more very much needs to use vitreous gum sealed.

Have the vitreous glue that does not become moldy forever?

So the issue came: Use so extensive glass glue to need his to buy?

Depend and decide.

Decorate company and installation personnel to meet his to take vitreous glue mostly, can be for be economical, they may choose poorer vitreous glue, agglutinant not strong, retractility is bad, mouldproof the effect is poor. General and most 6 months, can appear the problem such as nigrescent, mildewy, cankered, craze.

Want the what glass glue that says hello to they are used ahead of schedule so, if bad, prepare with respect to oneself.

1, the classification of vitreous glue

Vitreous glue divides the acidity glass glue, neuter glass glue, glue that avoid a hammer.

Acidity glass glue

Have after open apparent pungent sexual odour, agglutinant very strong, solidify time is short, 2 hours of or so surfaces are normally able dry, 24 hours of OK and complete solidify.

It is certain to have caustic, so a lot of things cannot be used, for instance mirror, it can corrode the coating of specular backside.

But the need such as place of place of dumb like wooden line backside mouth, the line that play a base sticks the place with particularly powerful force, had better use acidity glass gum.

Have the vitreous glue that does not become moldy forever?

Neuter glass glue

Did not prick nasal sex odour, also do not have caustic. But agglutinant weaker, solidify time is a bit long, general 3~4 hour surface is dry, 48 hours of ability are complete solidify.

Because taste of neuter glass glue is little and not caustic, the application in be being decorated indoors so is the widest, divide again for mouldproof fluid sealant, be able to bear or endure state case of fluid sealant, stone material fluid sealant, conduit fluid sealant, aquatic animals special glue is waited a moment, different glue applies to different situation, for instance hutch defends the place that waits for moisture to use mouldproof glue, window is used be able to bear or endure await glue.

Have the vitreous glue that does not become moldy forever?

Avoid hammer glue

Can regard neuter glass as glue strengthen edition, combined the advantage of acidity and neuter glass glue, stick muscularity, bearing the gender is good, do not have again at the same time caustic.

What often be used at more serious article and metope is stickup, for example mirror, frame.

Have the vitreous glue that does not become moldy forever?

The price of vitreous glue

"A minute of price a minute of goods " , this word is used in vitreous glue above especially appropriate. Not corrupt petty gain buys a few yuan or ten yuan glass glue, stick relay, fight crack, retractility, mouldproof the effect should be differred a lot of.

The vitreous glue of same brand, same set, neuter compares acidity expensive 3~4 yuan. The 2~3 that price of the glue that avoid a hammer is neuter glass glue times

Intermediate vitreous glue is in 25 yuan basically / raise above; Be in 80 yuan high-gradely / raise the left and right sides and above. The price is more expensive, performance is better.

Basis group friendly feedback, public praise compares good brand to have: Daokangning, Toshiba, GE is waited a moment.

Common 3 rooms the house of 1 hall, the vitreous glue that the likelihood needs to be used to 15 or so, with intermediate vitreous glue 25 yuan / will calculate, need 600 yuan probably.

Have the vitreous glue that does not become moldy forever?

The color of vitreous glue

Common color has black, porcelain white, transparent, silver grey, Gu Tong is waited a moment. Choose the color that matchs with photograph of applicable circumstance, applicable profile as far as possible. Do not have tie-in color really, choose transparent color.

Have the vitreous glue that does not become moldy forever?

White glass glue

2, the vitreous glue that does not become moldy?

A place that use glass glue makes a person headache most is: It will be mildewy.

Other place is not bad, resemble washing one's hands cistern of room of pool, shower, kitchen these places that often touch water, no matter choose much more expensive much better glass glue, to finally, it seems to be able to blacken mildewy.

Have the vitreous glue that does not become moldy forever?

Won't that blacken forever mildewy vitreous glue?

Simple and crude bear the blame the ground tells you: Without.

Someone says, you deceive people, I open the search that clean out treasure " vitreous glue " 3 words, those who see all of one suit is completely " waterproof and mouldproof " !

Have the vitreous glue that does not become moldy forever?

Basin friend, do you believe value really is what can have the vitreous glue of 4 many money had waterproof and mouldproof effect? ? ?

Factual truth is: These vitreous glue added mould inhibitor really, it is certain to have waterproof and mouldproof ability, but did not assure mouldproof time.

In national level, mouldproof effect cent is 0~4 grade, and cycle of groovy mould education is 28 days.

That is to say best mouldproof the effect the vitreous glue of 0 class, also be 28 days of immanent enlarge 50 times only without apparently long mildew.

Have the vitreous glue that does not become moldy forever?

So family so say to also do not have illness, should accord with only apparently long mildew is not being had inside 28 days is mouldproof glue. But general mouldproof vitreous glue, do not give a few months, can become yellow, then blackens mildewy; Good, expensive mouldproof vitreous glue also can hold to 9 years only, finally still is can mildewy.

Have the vitreous glue that does not become moldy forever?

In the final analysis, blacken the nature that becoming moldy is vitreous glue, without can avoid.

Because we are common,this is the vitreous gum that uses in domestic outfit is silicon ketone glue, bases is siliceous natrium.

Silica gel belongs to poriferous structure, the surface and interior have a lot of small opening, when receiving water moisture, can have a lot of mould and other microbial grow between the surface of vitreous glue and aperture, after a considerable period of time, vitreous glue can become yellow to blacken.

Have the vitreous glue that does not become moldy forever?

The surface becomes yellow to blacken to cannot be afraid of, can cooperate cleaner with tooth brush (blanch water, 84 disinfection water to wait) clean.

Once mould grows the interior of vitreous glue, that was not saved, can scrape only be hit afresh.

Fortunately mildewy vitreous glue scrapes very easily, what cooperate steel wire ball to be able to be blown with art design knife commonly is very clean.

Have the vitreous glue that does not become moldy forever?

3, is there the thing that can you replace vitreous glue?

In last few years, appeared however a few OK and permanent waterproof and mouldproof newly emerging things, be used by a lot of people substitute vitreous gum.

Among them most of fire have: Model steel mud, beauty seams an agent / porcelain seams an agent.

Model steel mud

Bases is epoxy resin + solidify agent, the compact property that is similar to porcelain decided it nots allow to grow mildew easily, there just can be bilge to adhere to in the surface, but brush new and clean brightness with tooth brush.

Have the vitreous glue that does not become moldy forever?

And construction is convenient, sealing is first-rate, not ugly also, very perfect is there wood?

But cannot help sprinkling cold water again, force of agglutinate of model steel mud is super and powerful, caky hind resemble cement same, blow very hard again came down. If later period needs to maintain or change of a what, very troublesome.

Have the vitreous glue that does not become moldy forever?

The place that often maintains like the need such as sewer so does not suit to use model steel sludge.

Have the vitreous glue that does not become moldy forever?

The United States seams an agent / porcelain seams an agent

The United States seams agent, porcelain to seam agent more is to be used those who seam at ceramic tile to tick off, it is beautiful that porcelain seams an agent those who seam an agent upgrade product.

The beautiful bases that seam an agent is colophony + solidify agent, as model steel mud, OK and permanent waterproof, mouldproof. But distinction is seaming agent simple sense to slant at the United States soft, dot and this vitreous glue are similar.

The beautiful photograph that seam an agent is morer than vitreous glue color, more good-looking. Because this is thought of by a lot of people,take replace vitreous glue to be used in hutch defend prevent watertight to zip.

Have the vitreous glue that does not become moldy forever?

And porcelain seams an agent to follow model steel mud very similar, its bases also is epoxy resin + solidify agent, quality of a material is solid, once stick,go up solidify hind was eradicated very hard.

The United States seams an agent faulty also, general aperture compares great place, seam an agent with the United States very wasteful material. And do come out appearance is good-looking without vitreous glue instead, do not please painfully.

Have the vitreous glue that does not become moldy forever?

With vitreous glue

Have the vitreous glue that does not become moldy forever?

Seam an agent with the United States

Although model is steel mud, beautiful now the price that seam an agent is much cheaper than before, but relatively be being returned at vitreous glue is expensive, the value that provides the United States to seam an agent can buy the vitreous glue of a lot of canals.

Do not have the thing of perfect originally actually, product itself does not have the cent of actor bad absolutely, we can contrast only their function, choose to fit oneself product according to oneself demand next.

Seam little place for instance, can seam an agent completely to substitute vitreous gum with the United States, but seam great place to seam an agent with respect to unwell and operable beauty.

Wait not to need to often change in bath crock, closestool, and the ark of ambry, bath a few blind angle that clear very hard and aperture can consider to use model steel sludge. But if be used in the place such as cistern, be about to consider maintenance of good later period to eradicate difficult question.

Have the vitreous glue that does not become moldy forever?

Mud of the steel that use model and beauty seam an agent to substitute vitreous gum, had better defend the place that waits to often touch water moisture in hutch only. Other place waits in the door window, floor, line that play a base or use vitreous gum, it is to suit more, 2 it is more economic cost.

For instance floor and metope aperture are in, with respect to mud of steel of unwell and operable model. Because of the floor meeting heat bilges cold shrink, and quality of a material of model steel mud is solid, solidify hind injures a floor easily.

This kind of circumstance still uses vitreous glue to suit more, because vitreous glue has flexibility, and just enclothe in aperture surface, won't affect a floor adjustable.

Have the vitreous glue that does not become moldy forever?

4, how to make beautiful vitreous gum?

Hit vitreous glue to calculate cost not simply commonly, it is to include inside construction quote or inside businessman installation charge.

Have some of special case, want oneself to make gum really, can consult move is as follows (apply to model steel mud and beauty to seam an agent likewise) :

Prepare gun of a glue (market price is controlled 10 yuan, bind a sale with vitreous glue normally, buy glue of a few canister to give a gun for instance) , the direct extruding using a hand with fine craftsmanship is OK also;

Have the vitreous glue that does not become moldy forever?

The air of rub-up of two objects surface that will need agglutinate;

If fear to make bad word, can control two to be stuck in the appearance that should make gum with beautiful grain paper, those who make sure last glass glue is hit is beautiful;

Have the vitreous glue that does not become moldy forever?

According to the specification vitreous glue installation is on glue gun, him need of glue mouth mouth of vitreous glue leaves, open a few smaller mouth sideways first, insufficient again enlarge.

Glue mouth touchs object face, avoid impending. Squeeze a bit slower, maintain divide evenly of 45 ° horn fast, wait for a quantity to make gum along aperture level. Because have protection of beautiful grain paper, hit so that also had nothing to do with askew;

Have the vitreous glue that does not become moldy forever?

If resemble this master having self-confidence euqally, need not use paper of the grain that stick the United States

Use finally hang board or finger applies has hit glue forcibly a bit smooth, in order to make colloid interior more close together, the surface is more flowing, it is OK to uncover beautiful grain paper uncover beautiful grain paper next;

Have the vitreous glue that does not become moldy forever?

Ventilated quiet place, acidity glass glue wants 24 hours, neuter glass glue wants 48 hours.

未经允许不得转载:News » Have the vitreous glue that does not become moldy forever?